Panasonic nv-hv22gn 用户手册
11
To Select the Recording Duration and
Perform Timer Recording (OTR Recording)
Perform Timer Recording (OTR Recording)
OTR means One-Touch Recording and is called this way,
because you can start recording and select the recording
duration by repeatedly pressing a single button. This is very
convenient, for example when you want to start recording
immediately but need to go out or want to go to bed.
After the selected recording duration has elapsed, recording
stops and the VCR automatically switches off.
because you can start recording and select the recording
duration by repeatedly pressing a single button. This is very
convenient, for example when you want to start recording
immediately but need to go out or want to go to bed.
After the selected recording duration has elapsed, recording
stops and the VCR automatically switches off.
To Perform an OTR Recording:
1 Display the VCR picture on the TV.
1 Display the VCR picture on the TV.
2 Insert a video cassette with an intact erasure
prevention tab.
3 Press [CH]
(20) to select the programme position on
which the TV programme to be recorded will be
broadcast.
broadcast.
4 Press [REC/OTR]
(37) to start recording.
5 Press [REC/OTR]
(37) repeatedly to select the desired
recording duration.
• Every time you press this button, the recording duration
• Every time you press this button, the recording duration
indicated in the VCR display changes in the following
order.
order.
• For example, if you select [30], the VCR records a
programme for 30 minutes.
Counter display (normal recording mode)
# 30 (min.) #
60 (min.)
# 90 (min.) # 120 (min.) # 180 (min.) #
240 (min.)
# Counter display (normal recording mode)
To Stop the OTR Recording Before the End:
Press [STOP]
Press [STOP]
(12).
Notes:
• The OTR function works during normal recording.
• When the tape reaches its end during OTR recording, the
• The OTR function works during normal recording.
• When the tape reaches its end during OTR recording, the
VCR will turn itself off.
Recording from an external source
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.
other recordings or video sources.
A new scene can be added to the end of previous one.
Preparations
• Connect a video movie camera or another VCR to this VCR
• Connect a video movie camera or another VCR to this VCR
as shown.
• Display the VCR picture on the TV.
• Insert the cassette on which the copying is to be performed,
• Insert the cassette on which the copying is to be performed,
and make sure that its erasure prevention tab is not broken
out.
out.
• Select the audio/video source required by pressing
[INPUT SEL]
(6) to set AV.
Operations
1 Press [PLAY]
1 Press [PLAY]
(8) to start playback.
2 At the point where you want to join a new scene, press
[PAUSE/SLOW]
(29) to put it in the still playback
mode.
3 Press [REC]
(15) to put it in the recording pause mode.
4 Start playback on the source unit and search for the
point from which you want to record (copy) onto this
VCR.
VCR.
5 When that point is reached, press [PAUSE/SLOW]
(29)
again to start recording the new picture and sound
from the playback unit.
from the playback unit.
6 To record (copy) additional scenes, press [PAUSE/
SLOW]
(29) to put this VCR in the recording pause
mode and then perform above steps 4 and 5 again.
7 At the point where you want to stop recording, press
[STOP]
(12) to finish recording.
Note:
• If you leave the VCR in the recording pause mode for more
• If you leave the VCR in the recording pause mode for more
than 5 minutes in step 3 or 6, the VCR automatically
switches over to stop mode to protect the video heads.
switches over to stop mode to protect the video heads.
To Delete all of a Cassette’s
Contents (Tape Refresh Function)
Contents (Tape Refresh Function)
You can delete a cassette contents (the picture, the sound
and the Jet Navigator data) all at once.
and the Jet Navigator data) all at once.
Operations
1 Be sure to set [JET NAVIGATOR] to [ON] when you
1 Be sure to set [JET NAVIGATOR] to [ON] when you
want to delete all contents of a cassette that is
recorded while setting [JET NAVIGATOR] to [ON].
Be sure to set [JET NAVIGATOR] to [OFF] when you
want to delete all contents of a cassette that is
recorded while setting [JET NAVIGATOR] to [OFF] or is
recorded on another VCR. (See page 8.)
recorded while setting [JET NAVIGATOR] to [ON].
Be sure to set [JET NAVIGATOR] to [OFF] when you
want to delete all contents of a cassette that is
recorded while setting [JET NAVIGATOR] to [OFF] or is
recorded on another VCR. (See page 8.)
2 Insert a cassette that you want to delete the cassette
contents.
3 Press [MENU]
(9) to display the Main menu on the
screen.
4 Press [
43] (28) to select the
[TAPE REFRESH], and then press
the [ENTER]
the [ENTER]
(26).
5 Press [ENTER]
(26) for
2 seconds or more to
start the tape refresh
function.
• When the tape refresh
start the tape refresh
function.
• When the tape refresh
function is working, the
remaining tape time
appears on the VCR
display.
remaining tape time
appears on the VCR
display.
The tape is rewound to the beginning, and it is fast-forwarded
with the tape refresh function.
When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
with the tape refresh function.
When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
Note:
• When a video cassette with a broken off erasure prevention
• When a video cassette with a broken off erasure prevention
tab is inserted, this function is not activated.
AUDIO
VIDEO
AC IN
∼
OUT
IN
(
AV1
)
(1)
(2)
(1) VIDEO IN
(2) Other VCR or Video movie
camera
Recording VCR
T A P E R E F R E S H
S T A R T :
E N T E R
E N D : S T O P
T A P E R E F R E S H
E N D : S T O P
SP
SP
REMAIN
LSQT0879.book 11 ページ ２００５年２月２３日 水曜日 午後８時４９分