Chevrolet blazer 2004 用户手册
Adding Washer Fluid
The windshield washer fluid reservoir is located toward
the front of the engine compartment on the driver’s
side of the vehicle. See Engine Compartment Overview
on page 5-12 for more information on location.
the front of the engine compartment on the driver’s
side of the vehicle. See Engine Compartment Overview
on page 5-12 for more information on location.
Open the cap with the
washer symbol on it. Add
washer fluid until the
tank is full.
washer symbol on it. Add
washer fluid until the
tank is full.
Notice:
•
When using concentrated washer fluid,
follow the manufacturer’s instructions for
adding water.
follow the manufacturer’s instructions for
adding water.
•
Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts
of the washer system. Also, water does not
clean as well as washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts
of the washer system. Also, water does not
clean as well as washer fluid.
•
Fill your washer fluid tank only three-quarters
full when it is very cold. This allows for
expansion if freezing occurs, which could
damage the tank if it is completely full.
full when it is very cold. This allows for
expansion if freezing occurs, which could
damage the tank if it is completely full.
•
Do not use engine coolant (antifreeze) in your
windshield washer. It can damage your washer
system and paint.
windshield washer. It can damage your washer
system and paint.
5-39