Panasonic sa-ht1500 用户手册

下载
页码 52
49
RQT7619
INF
O
Recording/Timer recording/Transferring (Dubbing)
Page
TV Guide On Screen
TM
 system
Play
Edit
When transferring (dubbing), 
it takes a long time even when 
high speed mode is selected.
≥Use a disc that is compatible with high speed recording. Even if the disc is high speed 
recording compatible, the maximum speed recording rating may not be possible due to the 
condition of the disc.
≥It takes longer than normal to transfer (dub) many titles.
≥You cannot high speed transfer (dub) to DVD-R titles longer than 6 hours when using other 
Panasonic DVD recorders that are not compatible with EP (8 hour) mode recording.

An unusually loud sound 
coming from the rotating DVD-R.
≥When recording or high speed transferring (dubbing) to a DVD-R, the sound of the disc 
rotating may be louder than normal; however, this is not a problem.
Television program list does 
not display when [TV GUIDE] is 
pressed.
≥Leave the unit turned off over night.
≥Check the connection and set up the TV Guide On Screen
TM
 system again.
≥Consult your service provider if you are using a cable TV box.
≥Television program list is not available in your area. Set the unit using “Auto Channel Setting”. Note 
that you can only set timer recording manually after you set the unit using “Auto Channel Setting”.
Setup Guide, 6
41
“Cable code -INCOMPLETE-” 
appears in the TV Guide On 
Screen
TM
 system setup.
≥The unit cannot find the correct IR code for the cable TV box. Consult your service provider.
As soon as the unit is turned on, 
and when you try to start timer 
recording, the TV Guide On 
Screen
TM
 system setup begins.
≥Even if you do not want to use the TV Guide On Screen
TM
 system, you need to complete the 
TV Guide On Screen
TM
 system setup (until [ENTER] is pressed after the “Watch TV” 
message screen is displayed). It will not be displayed after this point.
6
Several days of television 
program listings are blank.
≥Immediately after beginning use there are several days of blank listings. You can display 
program listings up to 8 days forward without any blank listings by downloading program lists 
continuously over several days.
Channel changes even when 
no operation is performed.
≥When the unit is connected to a cable TV box, the cable TV box channel changes while the 
unit is turned off in order to download the television program list.
Play fails to start even when 
[
1] (PLAY) is pressed.
Play starts but then stops 
immediately.
≥Insert the disc correctly with the label facing up.
≥You tried to play a blank DVD-RAM/DVD-R, or disc unplayable on this unit.
≥You may be able to transfer (dub) a “One time only recording” title that was recorded to 
DVD-RAM using a different Panasonic DVD Recorder to this unit’s HDD, but play is not 
possible due to copyright protection.
≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD 
players that are compatible with DVD-RAM. In this case use EP (6H) mode.
20
9
40
Audio and video momentarily 
pause.
≥This occurs between play list chapters.
≥This occurs between chapters and with partially deleted titles on finalized DVD-R that have 
been transferred (dubbed) using the high speed mode.

DVD-Video is not played.
≥Some DVD-Video cannot be played when you change the ratings level.
39
Alternative soundtrack and 
subtitles cannot be selected.
≥The languages are not recorded on the disc.
≥You may have to use the disc’s menus to select languages.

No subtitles.
≥When progressive output is on, closed captions cannot be displayed.
≥Subtitles are not recorded on the disc.
≥Turn the subtitles on.

24
Angle cannot be changed.
≥Angles can only be changed during scenes where different angles are recorded.
You have forgotten your 
ratings password.
≥While the disc tray is open, press [DVD] then press and hold [D] and [E] on 
the main unit at the same time for 5 or more seconds.
Quick View does not work.
≥This does not work if the setting is “Off” in “Search Audio & PLAY k1.3”.
≥This does not work when audio is other than Dolby Digital.
≥This does not work when recording is in XP or FR mode. [RAM]
40

The resume play function 
does not work.
≥This function only works when “PLAY” is flashing in the unit display.
≥Memorized positions are canceled when the unit is turned off or when the tray is opened. The 
memorized position on the play list is also canceled when the play list and title are edited.

Cannot format.
≥The disc is dirty. Use a special cleaner and wipe clean.
≥You tried formatting a disc that is not compatible with this unit.
10
9
Cannot create chapters.
Cannot mark the start point or 
the end point during 
“Shorten” operation.
≥The unit writes the chapter division information to the disc when you turn it off or remove the 
disc. The information is not written if there is an interruption to the power before this.
≥These operations are not possible with still pictures.
≥You cannot set points if they are too close to each other. You cannot set an end point before a start point.

Cannot erase chapters.
≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter longer.
27
The available recording time 
doesn’t increase even after 
erasing recordings on the disc.
≥Available recording space on the DVD-R does not increase even after erasing previously 
recorded titles.
Cannot create a play list.
≥You cannot select all the chapters at once in a title if the title also includes still pictures. Select them individually.
7619en.book  49 ページ  2004年5月6日 木曜日 午前9時33分