Panasonic sc-ht330 用户手册

31

RQT8103

≥Select “DVD/CD” as the source.
≥Cancel all group, program and random play.

≥Ensure that the unit is connected directly to the television, and is not connected through a video 

cassette recorder.

≥Change “TV Aspect” in the “Video” tab.
≥Use the television to change the aspect. If your television does not have that function, change 

“4:3 Aspect” in Display Menu.

≥Change the Zoom setting.

≥The unit and television are using different video systems.

[Southeast\Asia\and[Thailand[ Use a multi-system or NTSC television.
[Others] Use a multi-system or PAL television.

≥The system used on the disc does not match your television.

– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL television (“NTSC Disc 

Output” in “Video” tab).

≥Restore the zoom ratio to “a1.00”.
≥Set “Subtitle Position” in Display Menu to “0”.
≥Set “4:3 Aspect” in Display Menu to “Normal”.

≥Turn off TV’s zoom function.
≥Use the other preset aspect ratios or manual adjustment.
≥Zoom function may not work well, especially in dark scenes and may not work depending on the type of disc.

≥Mobile telephone chargers can cause some disturbance.
≥If you are using a TV indoor antenna, change to an outdoor antenna. 
≥The television antenna wire is too close to the unit. Separate the antenna wire of the television from the unit. 

≥This problem is caused by the editing method or material used on DVD-Video, but should be 

corrected if you use interlace output. Change “Video Output Mode” in Picture Menu to “625i (or 
576i)” or “525i (or 480i)”.

≥Press [SHIFT]i[PROGRESSIVE] so “PRG” is displayed. Or select “625p (or 576p)” or “525p (or 

480p)” in “Video Output Mode” in Picture Menu.

≥If the unit is connected to the television through VIDEO OUT, S-VIDEO OUT or SCART (AV) 

terminal, output will be interlace even if “PRG” is displayed. 

≥Adjust the position of the FM or AM antenna. 
≥Use an outdoor antenna.

≥Turn the television off or move it away from the unit.

≥Separate the antenna from other cables.

≥To use functions labeled in orange, while pressing [SHIFT], press the corresponding button.

≥Select “Bright” in “FL Dimmer” in the “Others” tab.

≥You inserted a disc the unit cannot play; insert one it can.
≥You inserted a blank disc.

≥You haven’t inserted a disc; insert one.
≥You haven’t inserted the disc correctly; insert it correctly.

≥Check and correct the speaker cord connections.

If this does not fix the problem, there is a power supply problem. Consult the dealer.

≥Disc may be dirty. Wipe it clean.

≥Incorrect operation performed. Read the instructions and try again.

∑∑”

∑∑ stands for a number.

≥Trouble may have occurred. The number following “H” depends on the status of the unit. Turn the 

unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC mains lead, and 
then reconnect it.

≥If the service numbers fail to clear, note the service number and contact a qualified service person.

/”

≥The operation is prohibited by the unit or disc.

≥You are trying to play an incompatible group or content.

≥You are trying to play a protected group or content. You cannot play it.

≥Audio has not been recorded, or recorded in a format this unit cannot playback. Video playback 

only is possible.

≥This disc may be dirty. 

≥You can only play DVD-Video if their region number is the same or includes the same region 

number as the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit 
on the rear panel.

≥Select “On” in “On-Screen Messages” in the “Display” tab.

8103en-p26-32.fm  Page 31  Tuesday, May 3, 2005  4:21 PM