Panasonic SC-HT07 用户手册

eratio

RQT7

Other functions

You can adjust the effect of MUSIC and PANORAMA with the
center width control.
This adjustment helps you realize a more natural sound image
when listening to music. Move sound out into the front speakers
to improve the overall front image, or add sound to the center
speaker to fix the center image.
You can choose a level between 0 (the center speaker is
dominant) and 7 (center sound is spread out).
The default level is 3.
Remote control

1.Press [EFFECT] to select “C-WDTH”.
2.Press [–/L] or [+/R] to adjust the effect.

You can adjust the effect of MUSIC and PANORAMA with the
dimension control.
You can make up for differences in the output level of the front
and surround speakers.
You can choose a level between –3 and +3 — Increase the level
to move sound to the front speakers, decrease to move it to the
surround speakers.
The default is level 0.
Remote control

1.Press [EFFECT] to select “DIMEN”.
2.Press [–/L] or [+/R] to adjust the effect.

Remote control

Press [MUTING].

To cancel
Press [MUTING] again.
Muting is also canceled when the unit is turned off.

Center Width Control "C-WDTH"

Dimension Control "DIMEN"

Muting

(This works on digital signals that have a center channel)
You can make the sound of the center speaker seem like it is
coming from within the television.
Remote control

Press [CENTER FOCUS].

“C.FOCUS” lights.
The factory setting is off.

The center focus cannot be used in the following case.
When input signal is PCM or analog stereo.
When DVD ANALOG 6CH is selected.

For selecting subwoofer level.
Remote control

Press [SUBWOOFER].

Adjust the level in 5 steps:
SW MIN, SW 5, SW 10, SW 15, and SW MAX.
Select

SW - - -

to stop output.

Note

Sound can be distorted if you raise the volume while subwoofer
level is high. Reduce subwoofer level if this occurs.

This unit automatically detects whether input is digital or
analogue, but you can fix the input mode.
Remote control

Press [INPUT MODE] to select "AUTO", "ANALOG" or
"DIGITAL".

In rare cases, the unit may have trouble recognizing the digital
signals on discs.
• With the PCM signals on CDs, this may cause the beginning

of a track to be cut off. Engage the PCM FIX mode if this
occurs.

• With DTS, the signals may not be recognized at all. Engage

the DTS FIX mode if this occurs.

While the input source is selected:
Remote control

1.Press [INPUT MODE] to select “DIGITAL”.
2.Press and hold [INPUT MODE] for four seconds.

The current mode is displayed. Press again to change the mode.
Each time you press the button:

AUTO

→

PCM FIX

→

DTS FIX

When a FIX mode is on, the unit cannot process other signals.
This may cause noise to be output. Select “AUTO” if this occurs.
The mode returns to AUTO when you switch the unit to standby.

For your reference
If you are playing a DTS CD that contains both DTS and PCM,
but it isn’t playing properly, then do the following after step 1
above: Use the MULTI CONTROL to enter the “OPTION” –
“DTS-PCM” menu and select “ON”. If this causes noise to occur,
return the setting to “OFF”. (This setting is effective for each
digital source.)

Center focus

Subwoofer level

Input mode

PCM/DTS fix mode

STEREO/

2CH MIX

MUSIC

AV/MOVIE

SFC

SLEEP

TONE/

BALANCE

LEVEL

EFFECT

ENTER

DISC

TUNER/BAND

VOLUME

TOP MENU

DIRECT

NAVIGATOR

DISPLAY

DIMMER

SUBWOOFER

TV/AV

RETURN

PLAY

LIST

DIRECT TUNING

TEST

MUTING

TV VOL

-/--

OFF

CENTER

FOCUS

INPUT

MODE