Panasonic sc-ht600 用户手册

下载
页码 32
K
CMY
CY
MY
CM
Y
M
C
07.eps 175 lpi  45˚
                    black 
Warning
   
The speakers can be operated only together with the 
   recommended devices, otherwise, the amplifier or 
   speakers may be damaged, even leading to a fire. 
   If there is any damage or you feel that there is certain 
   abrupt change, consult professional maintainers 
   Never hang these speakers in methods other than 
   those described in the operating instruction.
Precautions on speaker operation
   
If the speakers are operated at high volume for long term, they 
   may be damaged and their service life may be shortened.
   In following conditions, please reduce the volume in order to
   avoid damage.
-  When the speakers give out distorted sound.
-  When speakers receive the whistle form microphone or record 
   player, the noises from the FM radio, or the continuous signals 
   from oscillator, testing disc or electronic instruments.
-  When sound quality is being adjusted.
-  When you switch on or off the unit.
Attaching to a wall
2. Fix the speakers upon the screws through the 
    holes in the speakers
30-35mm
7.5-9.0mm
8-11mm
wall
level layout
Other methods for installation of center speakers and surround speakers
How to install the baseplate of front speaker and how to use the rear clip
Note
The walls or beams for hanging speakers should be capable of bearing a weight of 10kg.
The wall  sur face must be 
able to support over 30kg.
1. Screw the screws (not included)  into 
    the wooden walls.
How to use the clip behind speaker
If there are abnormal colors on the television
Although these speakers are designed to be located near 
televisions, with some combinations of television and 
equipment, the image may be affected.
If this happens, switch off the television for about 30 
minutes.
The demagnetizing function of television can correct the problem; 
if the problem remains the same, locate the speakers farther 
from the television.
E.g.Central Speaker
200mm
200mm
Screw
Intallation method of 
front speaker baseplate 
when installing,please avoid the speaker 
falling over.
The installation is requested to perform on a blanket or a 
floor covered with soft cloth for fear of damaging the 
speakers.
Reverse the front speaker box , and place the baseplate 
on the speaker (with the foot pads upward), and 3 holes 
in the baseplate should be aligned to the 3 holes in the 
speaker accordingly .
The screws attached to this packing box are used to place 
into the 3 holes. Use a screw driver to screw up the 3 
screws until the baseplate and speaker tightly joined and
secure.Please use proper strength, otherwise,the hole will 
be damaged.
Reverse the installed speaker, so that the unit is ready for 
use.
The speaker is equipped with clip at its upper rear, which may 
be used to prevent the speaker from falling. 
User may tie the clip to a solid string, strain and fix the string 
onto wall behind the speaker or other solid objects.
wall screw (not included)
Speaker clip
blanket
        String 
(not included)
wall
approx. 150mm 
RQTC0019
Getting started