Panasonic sc-ht700gn 用户手册

42

RQT6756

Set the unit up on an even surface away from direct sunlight, high 

temperatures, high humidity, and excessive vibration. These 
conditions can damage the cabinet and other components, thereby 
shortening the unit’s service life.

Do not place heavy items on the unit.

Do not use high voltage power sources. This can overload the unit 

and cause a fire.

Do not use a DC power source. Check the source carefully when 

setting the unit up on a ship or other place where DC is used.

Ensure the AC mains lead is connected correctly and not 

damaged. Poor connection and lead damage can cause fire or 
electric shock. Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC 

mains lead can cause electric shock.

Do not handle the plug with wet hands. This can cause electric 

shock.

Do not let metal objects fall inside the unit. This can cause electric 

shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or 

malfunction. If this occurs, immediately disconnect the unit from the 
power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain 

flammable gases which can ignite if sprayed into the unit.

Do not attempt to repair this unit by yourself. If sound is 

interrupted, indicators fail to light, smoke appears, or any other 
problem that is not covered in these instructions occurs, disconnect 
the AC mains lead and contact your dealer or an authorized service 
center. Electric shock or damage to the unit can occur if the unit is 
repaired, disassembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power 

source if it is not to be used for a long time.

To clean this unit, wipe with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, read the instructions that 

came with the cloth carefully.

≥Press [SHIFT]i[FL DISPLAY] to brighten the display.

≥You inserted a disc the unit cannot play; insert one it can.
≥You inserted a blank DVD-RAM.

≥You haven’t inserted a disc; insert one.
≥You haven’t inserted the disc correctly; insert it correctly.

≥Check and correct the speaker cord connections.

If this does not fix the problem, there is a power supply problem. Consult the dealer.

6, 8

≥Disc is dirty. Wipe it clean.

≥Incorrect operation performed. Read the instructions and try again.

∑∑”

∑∑ stands for a number.

≥Trouble may have occurred. The number following “H” depends on the status of the unit.

Reset procedure:
Press [

Í] to switch the unit to the standby mode and then back to ON. Alternatively, press [Í] 

to switch the unit to the standby mode, disconnect the AC mains lead, and then reconnect it.

≥If the service numbers fail to clear, note the service number and contact a qualified service 

person.

≥Go to Display in the SETUP menus, and select “On” for “On-Screen Messages”.

≥Press [3, 4] while the rightmost icon is highlighted to move them down.

≥Go to Disc in the SETUP menus, and select the preferred language for “Menus”.

≥You are trying to display incompatible pictures.