Panasonic tx-26lx500f 用户手册
22
PC mode
Setup menu
During PC mode
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to exit Setup menu.
MENU
EXIT
Main menu
P i c t u r e menu
Setup menu
Sound menu
PC setup
Access to adjust chosen option.
Input :
resolution
resolution
Displayed during VGA, WVGA, XGA, WXGA input signals.
Select WVGA or WXGA during WVGA or WXGA input signal to avoid noise.
Note:
WVGA and WXGA signals may not be displayed properly.
Select WVGA or WXGA during WVGA or WXGA input signal to avoid noise.
Note:
WVGA and WXGA signals may not be displayed properly.
Clock : If a periodic striped pattern (noise) occurs, carry out adjustments to reduce the noise to the
lowest level.
H-pos : Adjust the horizontal position.
V-pos : Adjust the vertical position.
Clock phase : Eliminate the fl ickering and distortion.
Carry out this adjustment after adjusting Clock.
Adjust to reduce noise to the most inconspicuous level.
Adjust to reduce noise to the most inconspicuous level.
Sync : H & V - To synchronize by the horizontal and vertical signals from your PC.
On G - To synchronize by the green signal form your PC (if available).
Volume correction, OSD language
About settings, see page 11.
H-freq. / V-freq.
If the input signal is not applicable, the characters will turn to red.
For applicable PC signals information see page 41.
For applicable PC signals information see page 41.
Clock
Input resolution
H-pos
V-pos
Clock phase
Sync
V-pos
Clock phase
Sync
H & V
VGA
PC setup
PC setup
OSD language
Setup menu
Access
Volume correction