Panasonic UB-5825 用户手册

■ Panaboard Operation Panel

It is possible to perform the same operations as with the electronic board control panel (page 9) from the following 
Panaboard Operation buttons.

• While the Panaboard Operation Panel is displayed, the Copy Key and 2-Screen Copy Key on the electronic 

board control panel are used for scanning images into the computer.

This lamp indicator notifies the user when the time to 
replace the thermal transfer film is approaching (estimated) 
and of the contrast used during scanning or copying.
Indicator off: 

Normal scanning or copying contrast

Indicator on: 

Darker than normal scanning or 
copying contrast

Indicator flashing*: Almost time to replace the thermal 

transfer film

Replacement film (UG-6001) is separately 
available from the dealer where you purchased 
your unit.

Each time this button is pressed, the unit will alternate 
between normal and dark contrast modes (Normal/Dark).

This button scans the front and back of the screen on a 
single page.

This indicator displays the number of copies to be made. 
The display changes each time the Multi-Copy/Stop Button 
is pressed.

Example: 1 

→  2 →  ··· →  9 →  1 →  ···

When an error occurs, a flashing symbol will appear in this display to 
indicate the error status. (See page 27.)

When making multiple copies, press this button until the 
desired number of copies is displayed on the Multi-Copy/
Error Indicator. This button can also be pressed to stop 
copying while executing multiple copies.

• The display changes as shown below each time the screen is copied. 

After reaching 0, the display will reset to 1.

Example: 5 

→  4 →  3 →  2 →  1 →  0 →  1 

(Number is counted down.)

This button scans the screen.

Clicking this button advances the screen from right to left.