Panasonic wj-sx550a 用户手册
-95-
OPERATING PROCEDURE
Before starting the following procedures, all system com-
ponents should be turned on.
ponents should be turned on.
1. Log-in
1. Turn on the power switches of all system components.
Caution:
If the WJ-AD550 Extension Unit is used in
the system, turn the Extension Unit power on
before turning power on the WJ-SX550A Matrix
Switcher.
before turning power on the WJ-SX550A Matrix
Switcher.
2. Press the Controller On/Off Switch located on the rear
of the System Controller, to the ON position.
3. Press the
CAM (SET)
Key, the Operator No. display
now appears on the LCD.
4. Enter the registered Operator No. by pressing the
Numeric Keys, then press the
CAM (SET)
Key.
Initially, 1 is selected at the factory.
5. Enter the registered Password (five numbers) by
pressing the Numeric Keys.
Initially, 12345 are selected at the factory.
Initially, 12345 are selected at the factory.
Initial Check
9600 BPS
9600 BPS
Log-in
1
2
3
4
5
6
7
8
9
MON
CAM
ESC
SET
0
Log-in
Operator No :
2
3
4
5
6
7
8
9
MON
CAM
ESC
SET
0
1
Operator No :
Operator No : 1
1
2
3
4
5
6
7
8
9
MON
CAM
ESC
SET
0
Password :
Welcome
....
See page 83 for details on registering operator num-
bers.
bers.
See page 83 for details on registering password num-
bers.
bers.
Note:
If the Auto Log-in Setting is selected On mode,
any operator can be Log-in automatically as an
operator previously.
Refer to the Auto Log-in Setting on page 117.
operator previously.
Refer to the Auto Log-in Setting on page 117.
6