Crestron cen-tvav 用户手册

下载
页码 52
Crestron CEN-TVAV 
Ethernet Enabled Programmable TV/AV Controller
 
 
Leading Specifications 
The table below and continued on the next page provides a summary of leading 
specifications for the CEN-TVAV. Dimensions and weight are rounded to the 
nearest hundredth unit.  
Leading Specifications of the CEN-TVAV 
SPECIFICATION
DETAILS
Power Input Requirements:            US 115VAC, 50-60 Hz, 6.6A maximum
                                         International 230VAC, 50-60 Hz, 5.5A maximum
Power Output:                                US
115VAC, 50-60 Hz, 6A maximum
                                         International 230VAC, 50-60 Hz, 5A maximum
Ethernet Network Type
10BaseT
Ethernet Network Protocols
TCP/IP, UDP/IP, ICMP (Ping), & CIP
IR Reception Frequency
455kHz
IR Reception Angle
Approximately 30
centered on IR receiver.
SIMPL Windows
Version 1.52.01 or later 
and TIO Files 
Version 109 or later 
1
CEN-TVAV Update File
Version 51205V.UPZ or later 
2
CNMXS-AV/Pro Update File
Version 51204X.UPZ or later 
2
CNRACKX/-DP Update File
Version 51204W.UPZ or later 
2
MaxAnalogSignals
2048 
3
MaxDigitalSignals 
16373 
3
MaxNVRAM
Not Applicable 
4
MaxProgramSize for SIMPL-C
256K (Ethernet section disabled with invalid 
IP Address of 0.0.0.0)
100K (Ethernet section enabled with valid IP 
Address)
MaxProgramSize for SIMPL+
512K
Dimensions & Weight
Height:  1.70 in (4.32 cm) 
Width:   7.07 in (17.95 cm) 
Depth:   6.32 in (16.06 cm) 
Weight: 3.63 lb (1.65 kg) 
5
 
The latest software version can be obtained from the Downloads page (SIMPLWIN 
Library) of Crestron’s website (
. New users are required to 
register in order to obtain access to the FTP site. 
Filenames for update files have a UPZ extension and can be obtained from the 
Downloads page (OPSYS Library) of Crestron’s website.  
Maximum number of SIMPL Windows signals that CEN-TVAV can process. 
The CEN-TVAV has a simulated clock and simulated NVRAM. If power is lost, the 
clock and symbols utilizing simulated NVRAM do not maintain previous settings.  
The weight listed is the combined weight of the CEN-TVAV, STIRP, 5-pin 
connector, and modular cable. 
As of the date of manufacture, this unit has been tested and found to comply with 
specifications for CE marking. 
 
NOTE:  This device complies with part 15 of the FCC rules. Operation is subject to 
the following two conditions: (1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that may 
cause undesired operation.  
Operations Guide - DOC. 5720A 
Ethernet Enabled Programmable TV/AV Controller: CEN-TVAV  
  7