Crestron cen-tvav 用户手册

Crestron CEN-TVAV 

Ethernet Enabled Programmable TV/AV Controller

To upload program files to the CEN-TVAV, it is necessary to first obtain 
communication with the device. Communication with the CEN-TVAV can be 
established via the local RS-232 port or TCP/IP. RS-232 communications is required 
to set IP address initially. Then TCP/IP communication is available.  

Prior to completing the following steps, be sure the communication cable is properly 
connected as described in “Cable Configuration for Programming” on page 8.  

1.  Make sure that no programs accessing the COM port of the PC are 

running.  

2. Select 

Start | Programs | Crestron | SIMPL Windows to start SIMPL 

Windows.  

3.  SIMPL Windows responds with an opening splash screen and may 

display the “What do you want to do?” dialog box. If so, close the 
dialog box.  

4.  As shown below, select Tools | Viewport to open the Crestron 

Viewport dialog box.  

 

5.  Refer to figure below. From the Setup menu, verify that Auto Baud 

Search is checked.  

 

•  17