Gateway E-9722R 用户手册
www.gateway.com
45
6
Loosen the thumbscrew (1), then lift the distribution module slightly and move it toward
the front of the case (2) to release it from the three locking tabs.
the front of the case (2) to release it from the three locking tabs.
7
Lift the power distribution board (3) out of the chassis.
8
Insert the new power distribution board into the chassis, then move it toward the back of
the chassis to engage the three locking tabs.
the chassis to engage the three locking tabs.
9
Tighten the thumbscrew to secure the power distribution board in the chassis.
10
Reconnect the power cables. See
for the location of the
connectors on the system board.
11
12
Reinstall the PCI riser assembly by following the instructions in
13
Follow the instructions in
.