JVC DT-E17L4G 用户手册

16

Settings for the audio output balance, EMBEDDED AUDIO signals and audio level meter signal.

Adjust the balance between the right and left speakers. 

L5 – L1, 0, R1 – R5

Select the video input through which audio is output.
Analog audio is input through the AUDIO ASSIGN (IN 1) terminal.

SDI-1, SDI-2, HDMI-Digital, 
HDMI-Analog, Component/
RGB, Video

Select the video input through which audio is output.
Analog audio is input through the AUDIO ASSIGN (IN 2) terminal.

SDI-1, SDI-2, HDMI-Digital, 
HDMI-Analog, Component/
RGB, Video

1

Select the audio channel group of the EMBEDDED AUDIO signals.
The setting values and selectable audio channels of EMBEDDED AUDIO signals are as 
follows. (G means GROUP)

1G, 2G, 3G, 4G, 1-2G, 1-3G, 
1-4G

channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)
channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)
channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/
1 – 8 (1G+2G)
channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)
channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/
3+4/5+6/7+8/9+10/11+12/1–4(1G)/5–8(2G)/
9–12(3G)/1–8(1G+2G)/1–12(-3G)
channel(s) 13/14/15/16/13+14/15+16/13–16(4G)
channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/1+2/3+4/
5+6/7+8/9+10/11+12/13+14/15+16/1–4(1G)/5–8(2G)/9–12(3G)/13-16(4G)/
1–8(1G+2G)/1–12(1-3G)/1-16(1-4G)

1

Specify the audio level meter display for EMBEDDED AUDIO signal.

Example of audio level meter display - Connection between the level meter position and channel

Ex: When “Horizontal” is selected for “Level Meter Display”:

Ex: When “Vertical” is selected for “Level Meter Display”:

-10dB

-20dB

-20dB

-10dB

-20dB

-10dB

•  The number of audio channels displayed on the level meter varies depending on the setting value of “Embedded Audio 

Group”.

•  The level meter with no audio signal input is displayed in white for “3COLORS”, and in gray for “White”.
•  Display position
  When “Horizontal” is selected for “Level Meter Display”, the display position will be the top or bottom of the screen.
  When “Vertical” is selected for “Level Meter Display”, the display position will be the lower right, lower left, upper left, or 

upper right of the screen.

•  When “On” is selected for “Peak Hold”, the maximum value is retained a certain period when the signal level becomes 

maximum.

Select the status of the level meter (display vertically, horizontally, or not displayed).

Off, Vertical, Horizontal

Select how the audio channels are displayed on the level meter.

Line, Divide

Adjust the vertical level meter position.

1, 2, 3, 4

Adjust the horizontal level meter position.

Upper, Lower

Specify the design of the level meter.

Bar, Block

Select the color of the level meter display.

3Colors (colored depending 
on the level), 
White (white only)

Select the standard input level indicated on the level meter.

–20dB, –18dB

Select the input level’s lower limit indicated in red for the “3Colors” display.

–10dB, –8dB, –6dB, –4dB, 
–2dB

Select the brightness of the level meter.

Low, High

Adjust the transparency of the level meter display against the image.

Off, Background, All

Activates/deactivates the peak hold function of the level meter.

Off, On

*

1

   Memorized for each input.

Green

REFERENCE 
LEVEL

OVER LEVEL

Red

Yellow

OVER LEVEL

REFERENCE LEVEL

DTE21L417L4G_EN_1.indb   16

12.2.24   4:01:05 PM