Toshiba 1202kit 用户手册
![Toshiba](https://files.manualsbrain.com/attachments/acaaaa9cc6b763ccfc72ced2ae95d9c94b8b8632/common/fit/150/50/8adbcbcd45c75dc53932fc9caf6f2740daed52d836b76efbd0162ac2599f/brand_logo.png)
6
DVD-RAM FRONT PANEL
The photo below illustrates the following features of the SD-W2002 DVD-RAM’s
front panel:
Emergency Eject Hole: The emergency eject hole is to be used only when the DVD
tray will not open when the Load/Unload button is pressed. Insert solid bar (i.e.
paper clip) into hole, applying gentle presure, until tray opens. Do not use Emer-
gency Eject Procedure while the drive is in operation.
Loading Tray: Load disc using tray or recording cartridge
Load/Unload Button: Used to open the disc tray so you can install or remove a
disc or recording cartridge.
Busy Indiactor: Provides status of drive.
front panel:
Emergency Eject Hole: The emergency eject hole is to be used only when the DVD
tray will not open when the Load/Unload button is pressed. Insert solid bar (i.e.
paper clip) into hole, applying gentle presure, until tray opens. Do not use Emer-
gency Eject Procedure while the drive is in operation.
Loading Tray: Load disc using tray or recording cartridge
Load/Unload Button: Used to open the disc tray so you can install or remove a
disc or recording cartridge.
Busy Indiactor: Provides status of drive.
DVD-RAM BACK PANEL
The photo below illustrates the following features of the SD-W2002 DVD-RAMs
back panel:
back panel:
Digital Audio Out Connector: Outputs Digital Audio on the DVD-RAM.
Analog Audio Out Connector: Outputs Analog Audio on the DVD-RAM.
ATAPI Connector: Connects DVD-RAM to computer.
Power Connector: Connects DVD-RAM to power source.
Mode Select Jumper: Selects if drive is to be Master, Slave or Cable Select.
Analog Audio Out Connector: Outputs Analog Audio on the DVD-RAM.
ATAPI Connector: Connects DVD-RAM to computer.
Power Connector: Connects DVD-RAM to power source.
Mode Select Jumper: Selects if drive is to be Master, Slave or Cable Select.