Toshiba ASD-G9ETH 用户手册
34
ICC
10.6.2 Device Identifiers
A BACnet device’s name and ID (the Object_Name and Object_Identifier
properties, respectively, of the Device Object) must be unique across the entire
BACnet network because they are used to uniquely identify BACnet devices.
The text entry boxes shown in Figure 23 are used to configure these unique
device identifiers on every drive.
properties, respectively, of the Device Object) must be unique across the entire
BACnet network because they are used to uniquely identify BACnet devices.
The text entry boxes shown in Figure 23 are used to configure these unique
device identifiers on every drive.
Figure 23: BACnet Device Identifiers
10.6.3 Submitting Changes
Whenever either of the BACnet configuration elements (Device Name or
Device ID) has been changed, the “submit” button located in the left-hand
portion of the web page must be clicked in order to write these settings to the
interface card’s filesystem.
Note that because these configuration elements are read from the filesystem
only when the interface card boots up, the act of submitting configuration
changes will also reset the interface card. Please allow 30 seconds for the
interface card to reboot, at which time it will then be operating with the recently-
submitted configuration. Refer to Figure 24.
Device ID) has been changed, the “submit” button located in the left-hand
portion of the web page must be clicked in order to write these settings to the
interface card’s filesystem.
Note that because these configuration elements are read from the filesystem
only when the interface card boots up, the act of submitting configuration
changes will also reset the interface card. Please allow 30 seconds for the
interface card to reboot, at which time it will then be operating with the recently-
submitted configuration. Refer to Figure 24.
Figure 24: Submit BACnet Changes