Toshiba portйgй m700 series, m705 series 用户手册
53
Getting Started
Adding memory (optional)
8
Place the screw and the cover in a safe place so that you can
retrieve them later.
retrieve them later.
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
Avoid touching the connector on the memory module or on the
computer. Grease or dust on the connector may cause memory
access problems.
computer. Grease or dust on the connector may cause memory
access problems.
9
Carefully remove the new memory module from its antistatic
packaging, without touching its connector.
packaging, without touching its connector.
10
Locate an empty memory module slot on the underside of the
computer.
computer.
If no memory slot is available, you must remove a module by
performing steps
performing steps
.
11
Pick up the memory module by its sides, avoiding any contact
with its connector. Position the module toward the socket,
aligning the connector’s notch with the matching key in the
socket.
with its connector. Position the module toward the socket,
aligning the connector’s notch with the matching key in the
socket.
(Sample Illustration) Aligning the memory module with the socket
NOTE
latch
latch
key
notch
connector