LG d5966g 用户手册

I N S TA L L AT I O N   I N S T RU C T I O N S

I N S TA L L AT I O N   I N S T RU C T I O N S

To ensure that the dryer provides optimal drying 
performance, it must be level. To minimize 
vibration, noise, and unwanted movement, the 
floor must be a perfectly level, solid surface. 

NOTE: Adjust the leveling feet only as far as 
necessary to level the dryer. Extending the 
leveling feet more than necessary can cause 
the dryer to vibrate.

Position the dryer in the final location. Place 
a level across the top of the dryer. 

Level

Leveling Feet

Use an adjustable wrench to turn the leveling 
feet. Turn clockwise to raise the dryer or 
counterclockwise to lower it. Raise or lower 
the leveling feet until dryer is level from 
side to side and front to back.

Make sure that all 4 leveling feet are in firm 
contact with the floor. 

The swing of the dryer door can be reversed to fit your installation location. 

Open the dryer door. Using a Phillips screw-
driver, remove the 2 screws that secure 
the door hinge to the dryer door opening. 
Remove the 4 screws from the latch side of the 
dryer door opening, and remove the door latch.

Turn the door around so the hinge is 
reversed, and reattach the door using the 
2 screws previously removed. Reinstall the 
door latch and the 4 screws.

Test the door swing to make sure the door 
moves freely and latches securely.

Hinge 
Screws

Door 
Latch

Latch Screws

Hinge 
Screws

Latch 
Screws

•  All four leveling feet must rest solidly on the 

fl oor. Gently push on the top corners of the 
dryer to make sure that the dryer does not 
rock from corner to corner. 

If you are installing the dryer on the optional 
pedestal, you must use the leveling feet on the 
pedestal to level the dryer. The dryer leveling feet 
should be fully retracted.

12