Yamaha aw1600 用户手册

14

MIDI and utility functions

AW1600  Owner’s Manual

The OSC page of the UTILITY screen lets you send the signal of the AW1600’s built-in test oscil-
lator (the test tone oscillator) to the desired bus.

To access this page, repeatedly press the Work Navigate 
section [UTILITY] key or hold down the [UTILITY] key 
and use the CURSOR [

]/[

] keys.

This page contains the following items.

1 WAVEFORM

Selects one of the following signals for output from the 
oscillator.

• OFF button.......................Oscillator is off

• 100Hz button ...................100 Hz sine wave

• 440Hz button ...................440 Hz sine wave

• 1kHz button .....................1 kHz sine wave

• 10 kHz button ..................10 kHz sine wave

• NOISE button...................White noise

When you turn on a button, the oscillator output will 
immediately be sent to the specified bus. Use the 

3

–

6

 

buttons to specify the bus to which the signal will be sent.

B

Adjusts the output level of the oscillator.

C

Send the oscillator output to AUX buses 1/2.

D

Send the oscillator output to effect buses 1/2.

E

Sends the oscillator output to the L/R bus.

F

Sends the oscillator output to the stereo bus.

G

Indicates the output level of AUX 1/2, effect bus 1/2, and 
the L/R bus.

Using the test tone oscillator

1

34

7

6 5

2