Yamaha AV Receiver 用户手册
80
SET MENU
Crossover
CROSS OVER
Use this feature to select a crossover frequency of all the
speakers set to “SML” (or “SMALL”) or to “NONE” in
“SPEAKER SET” (see pages 78 and 79). All frequencies
below the selected frequency will be sent to the subwoofer
or to the speakers set to “LRG” (or “LARGE”) in
“SPEAKER SET” (see pages 78 and 79).Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
speakers set to “SML” (or “SMALL”) or to “NONE” in
“SPEAKER SET” (see pages 78 and 79). All frequencies
below the selected frequency will be sent to the subwoofer
or to the speakers set to “LRG” (or “LARGE”) in
“SPEAKER SET” (see pages 78 and 79).Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
Subwoofer phase
SUBWOOFER PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices: NORMAL, REVERSE
bass sounds are lacking or unclear.
Choices: NORMAL, REVERSE
• Select “NORMAL” if you do not want to reverse the
phase of your subwoofer.
• Select “REVERSE” to reverse the phase of your
subwoofer.
■ Speaker level B)SPEAKER LEVEL
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in “SPEAKER SET” (see page 78).Control range: –10.0 to +10.0 dB
Control step: 1.0 dB
Initial setting: 0 dB
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in “SPEAKER SET” (see page 78).Control range: –10.0 to +10.0 dB
Control step: 1.0 dB
Initial setting: 0 dB
• Select “FL” to adjust the balance of the front left
speaker.
• Select “FR” to adjust the balance of the front right
speaker.
• Select “C” to adjust the balance of the center speaker.
• Select “SL” to adjust the balance of the surround left
• Select “SL” to adjust the balance of the surround left
speaker.
• Select “SR” to adjust the balance of the surround right
speaker.
• Select “SB” to adjust the balance of the surround back
speaker.
• Select “SWFR” to adjust the balance of the subwoofer.
“C”, “SL”, “SR”, “SB” and “SWFR” cannot be adjusted if
“CENTER SP” (see page 79), “SUR. L/R SP” (see page 79),
“SUR. B SP” (see page 79) and “LFE/BASS OUT” (see page 79)
are set to “NONE” respectively.
“CENTER SP” (see page 79), “SUR. L/R SP” (see page 79),
“SUR. B SP” (see page 79) and “LFE/BASS OUT” (see page 79)
are set to “NONE” respectively.
FREQ
;;;80Hz
CROSS OVER
>NORMALREVERSE
02A
SUBWOOFER PHASE
Note
.FL;;;;;;;;;;
FR
;;;;;;;;;;
C
;;;;;;;;;;
B)SPEAKER LEVEL
-__________+