Yamaha aw1600 用户手册
AW1600 Owner’s Manual
Deleting an unwanted sample
11
Quic
k loop sampler
126
Here’s how you can delete unused data (before the start point and after the end point) from a
specific sample, or completely erase an individual sample.
specific sample, or completely erase an individual sample.
1
In the Quick Loop Sampler section, repeat-
edly press the [SAMPLE EDIT] key or hold
down the [SAMPLE EDIT] key and use the
CURSOR [
edly press the [SAMPLE EDIT] key or hold
down the [SAMPLE EDIT] key and use the
CURSOR [
]/[
] keys to access the MEM-
ORY page of the SAMPLE screen.
In this page you can delete the unused portion of a
sample, or erase an unwanted sample.
sample, or erase an unwanted sample.
1 One Shot/Loop mode
This icon indicates whether One Shot mode (
) or
Loop Mode (
) is selected for the sample assigned to
the pad.
B
Pad number
Indicates the pad number 1–4.
C
Size
This area graphically indicates the memory size of
each sample. The horizontal line indicates the amount
of memory used by each pad.
each sample. The horizontal line indicates the amount
of memory used by each pad.
D
PAD
E
BANK
These select the pad (1–4) and sample bank (A–D) to
which the operation will apply.
which the operation will apply.
F
Sample name
Indicates the name of the sample for the pad and sam-
ple selected in
ple selected in
4
and
5
.
G
ERASE button
Erases the specified sample.
H
EXTRACT button
Discards the unused portions (before the start point
and after the end point) of the specified sample.
and after the end point) of the specified sample.
2
Move the cursor to the PAD/BANK fields,
and turn the [DATA/JOG] dial to select the
pad and sample bank.
and turn the [DATA/JOG] dial to select the
pad and sample bank.
The procedure after this point will depend on the function
that you want to execute.
that you want to execute.
1
To erase the entire selected sample, move
the cursor to the ERASE button and press
the [ENTER] key.
the cursor to the ERASE button and press
the [ENTER] key.
A popup window will ask you to confirm that you
want to erase the sample.
want to erase the sample.
2
To execute the erasure, move the cursor to
the OK button and press the [ENTER] key.
the OK button and press the [ENTER] key.
If you decide to cancel, move the cursor to the CAN-
CEL button and press the [ENTER] key.
CEL button and press the [ENTER] key.
1
Move the cursor to the EXTRACT button
and press the [ENTER] key.
and press the [ENTER] key.
A popup window will ask you to confirm that you
want to delete the data.
want to delete the data.
2
To execute the deletion, move the cursor to
the OK button and press the [ENTER] key.
the OK button and press the [ENTER] key.
If you decide to cancel, move the cursor to the CAN-
CEL button and press the [ENTER] key.
CEL button and press the [ENTER] key.
Deleting an unwanted sample
7
8
6
12
3
4
5
• For details on how to adjust the start point and end point of a
sample, refer to page 122.
HINT
■ To erase the entire sample
■ To delete the unused
portions of the selected sample