Yamaha 01V96 用户手册

Chapter 2—Console Window

O 

This is the channel’s short name. To edit the name, click it and type.

P 

This is the Input Channel’s fader.

Q 

This meter displays the signal level of the channel L or R.

A 

ONLINE/OFFLINE status indicator
This indicator shows whether Studio Manager is online or 
offline.

B 

Meters
These meters display the output level of the Stereo Out when 
PAN CONTROL is set to “STEREO,” or the Bus Outs used for 
surround processing when PAN CONTROL is set to “SURR.” 
The Meters in 3-1, 5.1 and 6.1 Surround modes are shown 
below.

C 

LAYER buttons
These buttons are used to select the Layers.

D 

PAN CONTROL
These buttons are used to select either “STEREO” (Stereo mode) 
or “SURR” (Surround mode). The Pan control on the Input 
Channels is a rotary control when “STEREO” is selected, and a 
dot on a pan graph when “SURR” is selected.

E 

SELECT button
This button is used to select the Stereo Out. If it’s clicked while 
the Remote Layer is selected, it will light up, but the Stereo Out 
will not appear in the Selected Channel window.

F 

ON button
This button turns the Stereo Out on and off. It appears orange 
while the Stereo Out is on.

G 

Channel fader
This is the Stereo Out fader.

1

2

3

5

6

7

4

3-1

5.1

6.1