Yamaha aw16g 用户手册
Overdubbing
58
Overdubbing
Now you can overdub onto the track that you selected as
the recording-destination.
the recording-destination.
1
In the Work Navigate section, repeatedly
press the [TRACK] key or hold down the
[TRACK] key and use the CURSOR [
press the [TRACK] key or hold down the
[TRACK] key and use the CURSOR [
]/[
]
keys to access the VIEW page.
2
Move the cursor to the metronome button,
and press the [ENTER] key to switch the set-
ting on or off as desired.
and press the [ENTER] key to switch the set-
ting on or off as desired.
You can perform overdubbing whether the metro-
nome is on or off.
nome is on or off.
3
In the transport section, hold down the REC
[
[
●] key and press the PLAY [ ] key.
The metronome will begin sounding, and the
counter display will advance.
counter display will advance.
4
While monitoring the previously-recorded
tracks, play the instrument that you want to
overdub.
tracks, play the instrument that you want to
overdub.
5
To stop recording, press the STOP [
■] key.
The [UNDO/REDO] key in the data entry / control
section will light.
section will light.
6
To listen to the recorded performance from
the beginning, press the RTZ [
the beginning, press the RTZ [
] key to
return the counter display to zero, and press
the PLAY [
the PLAY [
] key.
Tip!
Tip!
If you recorded from the middle of the song, you can
press the [IN] key to move to the location at which you
began recording.
press the [IN] key to move to the location at which you
began recording.
7
If you decide to re-do the recording, press the
[UNDO/REDO] key to cancel the recording, and
repeat steps 3–7.
[UNDO/REDO] key to cancel the recording, and
repeat steps 3–7.