Yamaha DSP-A970 用户手册
8
Center Level +/– Keys
Increase (+) or decrease (–) the volume level of the center
speaker(s).
speaker(s).
9
Rear Level +/– Keys
Increase (+) or decrease (–) the volume level of the rear effect
speakers.
speakers.
0
Reset Button
Press this button to “reset” the internal microcomputer which
controls remote control operations. Microcomputer “reset” is
necessary when the remote control freezes.
*
controls remote control operations. Microcomputer “reset” is
necessary when the remote control freezes.
*
Pressing the RESET button will not erase learned functions.
A
On Screen Display Key
Changes the type of display showing the program name and
parameters, or information about various settings/adjustments on
the connected monitor’s screen.
Whenever pressed, the screen changes to a full display,
simplified display and no display in turn.
parameters, or information about various settings/adjustments on
the connected monitor’s screen.
Whenever pressed, the screen changes to a full display,
simplified display and no display in turn.
B
Clear Button
Used in USER or LEARN mode to erase a learned function. (See
page 38.)
page 38.)
C
Effect On/Off Key
Cuts off the sound’s output from the front, rear effect and center
speakers. To restore the output from those speakers, press this
key again.
speakers. To restore the output from those speakers, press this
key again.
D
Parameter Select Keys
Select DSP program parameters, or titles of settings/adjustments
in the SET/MENU mode.
in the SET/MENU mode.
E
Muting Key
Mutes the master volume level by 20 dB. While muting, the
indicator on the master VOLUME control flashes on and off
continuously.
indicator on the master VOLUME control flashes on and off
continuously.
G
Parameter +/– Keys
Edit DSP program parameters, or used for five types of
settings/adjustments in the SET/MENU mode.
settings/adjustments in the SET/MENU mode.
H
Master Volume +/– Keys
Increase (+) or decrease (–) the master volume level.
I
Parameter/Set Menu Switch
When set to the PARAMETER position, the Parameter Select
Keys and Parameter +/– Keys will set and edit DSP program
parameters. When set to the SET MENU position, the Parameter
Select Keys and Parameter +/– Keys are used to perform five
types of settings/adjustments.
Keys and Parameter +/– Keys will set and edit DSP program
parameters. When set to the SET MENU position, the Parameter
Select Keys and Parameter +/– Keys are used to perform five
types of settings/adjustments.
J
Program Select Keys (1 through 12)
Select DSP programs 1 through 12.
K
Tuner Function Keys
Operate Yamaha tuner functions.
L
Tape Deck Function Keys
Operate Yamaha tape deck functions.
M
Blank Keys
Have no preset functions, so are used for learning other remote
controller’s functions only.
controller’s functions only.
N
1/2 Switch
When the YPC/USER/LEARN Switch is set to YPC, this switches
the CD/LD Function Keys to keys for use with either the CD
player or LD player. (“1” for the CD player and “2” for the LD
player.) When the YPC/USER/LEARN Switch is set to USER or
LEARN, this switch selects page 1 or 2 for the learnable function
keys. (See page 37.)
the CD/LD Function Keys to keys for use with either the CD
player or LD player. (“1” for the CD player and “2” for the LD
player.) When the YPC/USER/LEARN Switch is set to USER or
LEARN, this switch selects page 1 or 2 for the learnable function
keys. (See page 37.)
21
English