Yamaha elb01e1 用户手册
ELB-01 Owner’s Manual
46
Voice Controls and Effects
3
When Preset is selected, the original (factory) effect category for the selected
Voice is automatically set. Selecting Thru bypasses the effect (no effect is added
to the selected Voice).
Voice is automatically set. Selecting Thru bypasses the effect (no effect is added
to the selected Voice).
2
Effect Type
Effect types are displayed corresponding to the selected effect category.
Press the [C] button to make the “¿” indicator flash, then use the DATA
CONTROL dial to change the setting.
Press the [C] button to make the “¿” indicator flash, then use the DATA
CONTROL dial to change the setting.
Press the PAGE buttons to select Page 5.
Effect Parameters
You can set the parameters of effect type selected in the Voice Condition display, Page 4.
Generally, the effect parameters settings are automatically well-balanced to the selected
effect type, so there is no need to follow the steps below unless you want to change the
setting.
If you want to change the setting, select the parameter, then change the value. Since
selection of Parameters and setting of value follow the same procedure throughout all
Effect Type, instructions for only “Hall 1” of Reverb are given here.
For details, see page 52.
Generally, the effect parameters settings are automatically well-balanced to the selected
effect type, so there is no need to follow the steps below unless you want to change the
setting.
If you want to change the setting, select the parameter, then change the value. Since
selection of Parameters and setting of value follow the same procedure throughout all
Effect Type, instructions for only “Hall 1” of Reverb are given here.
For details, see page 52.
1
Parameters
Effect parameters are displayed corresponding to the selected effect type.Press
the [C] button to make the “¿” indicator flash, then use the DATA CONTROL
dial to select the parameters. In this case, the Time parameter is selected.
the [C] button to make the “¿” indicator flash, then use the DATA CONTROL
dial to select the parameters. In this case, the Time parameter is selected.
2
Value setting
Press the [D] button to make the “÷” indicator flash, then use the DATA
CONTROL dial to change the setting.
CONTROL dial to change the setting.
Reference Page
Voice Condition [Page 5]
TYPE:Hall 1 ¨1fi
¿Time ÷2.1s
¿Time ÷2.1s
Time ÷2.1s
Dry/Wet ÷D24>W
Currently selected Effect Type
TYPE:Hall 1 ¨1fi
¿Time ÷2.1s
¿Time ÷2.1s
1
2