Yamaha HTR-5930 用户手册

■ Selecting the input modes

This unit comes with a variety of input jacks. Do the 
following to select the type of input signals you want to 
use.

y

• We recommend setting “INPUT MODE” to “AUTO” in most 

cases.

• You can adjust the default input mode of this unit by using the 

“INPUT MODE” parameter in “INPUT MENU” (see page 55).

• To play DTS-encoded CDs when using a digital audio 

connection, be sure to set “INPUT MODE” to “DTS”.

• Depending on the player, DTS decoding may not be performed 

correctly even if you make a digital connection between this 
unit and the player. 

Press INPUT l / h on the front panel to 
select the desired input source.

AUTO

Automatically selects input signals in 
the following order:
1) Digital signals
2) Analog signals

DTS

Selects only digital signals encoded in 
DTS. If no DTS signals are input, no 
sound is output.

ANALOG

Selects only analog signals. If no 
analog signals are input, no sound is 
output.

When “INPUT MODE” is set to “AUTO”, this unit 
automatically switches to the appropriate decoder if a Dolby 
Digital or DTS signal is detected.

■ Adjusting speaker levels during 

You can adjust the output level of each speaker while 
listening to a music source. This is also possible when 
playing sources input at the MULTI CH INPUT jacks.

• Select “FRONT L” to adjust the front left speaker 

output level.

• Select “CENTER” to adjust the center speaker 

output level.

• Select “FRONT R” to adjust the front right speaker 

output level.

• Select “SUR. R” to adjust the surround right 

speaker output level.

• Select “SUR. L” to adjust the surround left speaker 

output level.

• Select “SWFR” to adjust the subwoofer output 

level.

y

Once you press LEVEL on the remote control, you can also 
select the speaker by pressing u / d.

Press j / i on the remote control to adjust the 
speaker output level.

The control range is from +10 dB to –10 dB for the 
center and surround speakers, and from 0 dB to 
–20 dB for the front speakers and subwoofer.

• This operation will override the level adjustments made in 

“SETUP” (see page 20).

• You cannot adjust speaker levels if “SPEAKER SET” in 

“SOUND MENU” (see page 53) is set to “NONE”.

• You cannot adjust the subwoofer level if “BASS” in 

“SPEAKER SET” (see page 53) in the set menu is set to 
“FRNT”.

• If you use LEVEL to adjust speaker levels, the speaker levels 

you previously set with the test tone will also change. 

• If you select “SETUP” (see page 20) and then select “SET”, 

speaker levels change in response to any changes you make in 
“SETUP”.

DVD    AUTO