Yamaha RX-V1600 用户手册

■ Clearing a macro function

You can clear the function programmed for a certain 
macro button.

Press MACRO using a ballpoint pen or 
similar object.
“MCR ?” appears in the display window.

If you do not complete each of the following steps within 30 
seconds, the macro programming mode will be 
automatically canceled. In this case, press MACRO again.

Press and hold CLEAR using a ballpoint pen 
or similar object, then press the macro 
button you want to clear for about 3 seconds.
C;OK appears in the display window if clearing was 
successful.

y

• If you continuously want to clear another function, repeat 

step 3.

• Once you clear a programmed function, the button reverts 

to the factory setting (or to the manufacturer setting if you 
have set remote control codes).

Press CLEAR to exit the clearing mode.
The remote control returns to the macro 
programming mode.

• C;NG appears in the display window if clearing was 

unsuccessful. In this case, start over from step 3.

• ERROR appears in the display window if you press a button not 

indicated in the respective step, or if you press more than one 
button simultaneously.

MACRO