Yamaha RX-V757 用户手册

■

 C)PARAM. INI

Use this feature to initialize the parameters for each sound 
field program within a sound field program group. When 
you initialize a sound field program group, all of the 
parameter values within that group revert to their initial 
settings.
Press the corresponding numeric button for the sound

 field

 

program that you want to initialize.
Choices:
An asterisk (*) appears next to program numbers that have 
been changed from their initial settings.
Choices: STEREO, MUSIC, ENTERTAINMENT, 

MOVIE, STANDAND

• You cannot automatically revert to the previous parameter 

settings once you initialize a 

sound

 field program group.

• You cannot separately initialize individual 

sound

 field 

programs.

• You cannot initialize any program groups when “MEMORY 

GUARD” is set to ON.

■

 D) MULTI ZONE SET

Use to specify the location of speakers connected to the 
SPEAKERS B terminals.

  SP B

Use this feature to select the location of the front speakers 
connected to the SPEAKERS B terminals.
Choices: 

, ZONE B

•

Select FRONT to turn on/off SPEAKERS A and B 
when the speakers connected to the SPEAKERS B 
terminals are set in the main room.

•

Select ZONE B if the speakers connected to the 
SPEAKERS B terminals are set in another room. If 
SPEAKERS A is turned OFF and SPEAKERS B is 
turned ON, all the speakers including the subwoofer in 
the main room are muted and the unit outputs sound 
from SPEAKERS B only.

• If you connect headphones to the PHONES jack on the unit 

when “SP B” is set to ZONE B, the sound is output from both 
headphones and SPEAKERS B.

• If a DSP program is selected when “SP B” is set to ZONE B, 

the unit automatically enters the Virtual CINEMA DSP mode.

  ZONE2 AMP

(U.S.A., Canada, Australia and Europe models only)
Use to select how the ZONE 2 speakers will be amplified.
Choices: INT, 

•

Select EXT if you do not use Zone 2 speakers or if you 
connect your Zone 2 speakers through an external 
amplifiers connected to this unit’s ZONE 2 OUTPUT jacks.

•

Select INT to use this unit’s internal amplifier if you 
connect your Zone 2 speakers directly to this unit’s 
PRESENCE/ZONE 2 speaker terminals.

■

 E)XM RADIO SET

XM DISPLAY
Use to set the time for displaying XM information in the 
on-screen display. If “10s” or “30s” is selected, xm 
information is displayed for 10 or 30 seconds after 
pressing DISPLAY.
Choices: OFF, 

, 30s, ON

y

When “XM DISPLAY” in the SET MENU is set to “ON”, 
pressing DISPLAY shows xm information until you select 
another input source (see page 30).

  XM ANT.

Use to check the current reception level for the XM 
connect and Play digital antenna accessory connected to 
this unit. For the best reception, orient the XM connect 
and Play digital antenna accessory so that a value of XX% 
or more is displayed here.
Range: NONE, 0 to 100%

“NONE” is displayed if the XM connect and Play digital antenna 
accessory is not connected to this unit. If this happens, check the 
antenna connections (see page 45).

 STEREO
*MUSIC
 ENTERTAINMENT
 MOVIE THEATER
*STANDARD
 Press DSP Key

C)PARAM.

INI

.SPB;;;;;;;;FRONT

ZONE2 AMP

;;;;;EXT

[<]/[>]:Select
[ENTER]:Return

D)MULTI ZONE

SET

.SPB;;;;;;;;FRONT

ZONE2 AMP

;;;;;EXT

[<]/[>]:Select
[ENTER]:Return

D)MULTI ZONE

SET

E)XM RADIO SET

XM DISPLAY

;;;10S

XM ANTENNA

;;;75%

[<]/[>]:Select
[ENTER]:Return