Yamaha virago xv250t 用户手册
PRE-OPERATION CHECKS
4-3
4
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Lubricate pedal pivoting points if necessary.
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Lubricate lever pivoting points if necessary.
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
• Lubricate pivot if necessary.
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
and switches
• Check operation.
• Correct if necessary.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
• If system is defective, have Yamaha dealer check vehicle.
Battery
• Check fluid level.
• Fill with distilled water if necessary.
• Fill with distilled water if necessary.
ITEM
CHECKS
PAGE
U2UJ1DE0.book Page 3 Thursday, May 13, 2004 11:59 PM