Electro-Voice xgs-4 用户手册
XGS-4 Groundstack
The X-Line Very Compact Groundstack Rails feature 3 rigging attachment positions to allow for single or dual columns
of X-Line Very Compact Loudspeaker Arrays to be Groundstacked and tilted to obtain the desired sound coverage. The
3 rigging attachment positions allow for 2 options -
of X-Line Very Compact Loudspeaker Arrays to be Groundstacked and tilted to obtain the desired sound coverage. The
3 rigging attachment positions allow for 2 options -
1. Stack dual arrays; an XLD281 array at the front position and an XS212 subwoofer array at the rear position.
2. Stack a single array of XLD281’s, XLE181’s, or a combination of XLD281’s and XS212’s at the middle position.
2. Stack a single array of XLD281’s, XLE181’s, or a combination of XLD281’s and XS212’s at the middle position.
X-Line Very Compact
XGS-4 Groundstack
User Instructions
Figure 1: Attaching Loudspeakers to
Groundstack Rails
Detent Pins
(4 per side)
Note: Dual Array shown using Front and Rear Positions.
Middle Position not used. To switch between Single and
Dual Arrays, Groundstack Rails must be rotated.
Middle Position not used. To switch between Single and
Dual Arrays, Groundstack Rails must be rotated.
XLD281 Loudspeaker
(Front Position)
XS212 Loudspeaker
(Rear Position)
(Rear Position)
Detent Pins
(2 per side)
XLD281, XLE181, or XS212
Loudspeaker
(Middle Position)
Note: Single Array shown using
Middle Position. Front and Rear
Positions not used.
Middle Position. Front and Rear
Positions not used.
Lag Bolt Holes
(2 per side)
To select the correct pin position on the bottom enclo-
sure of your XLVC Ground Stack, find your enclosure
type and specific angle, and pin the Ground Stack
swing arm to that position. For safety reasons, pin
only to numerically indicated positions. Left sides are
shown, right are mirrored views.
Figure 2: Angle Instruction for Bottom Enclosure
Pin Position