Escalade Sports 2l-6540-00 用户手册

IMPORTANT! READ THIS MANUAL ALL

THE WAY THROUGH BEFORE BEGINNING

TO PUT YOUR POOL TABLE TOGETHER!

THEN READ EACH STEP BEFORE

STARTING THAT STEP.

THE SPRAY ADHESIVE USED FOR APPLYING PLAYFIELD CLOTH IS
EXTREMELY FLAMMABLE AND UNDER PRESSURE! CAREFULLY READ
CAUTIONS ON SPRAY ADHESIVE CONTAINER! KEEP OUT OF REACH OF
CHILDREN! DO NOT USE OR STORE NEAR HEAT SOURCE, FLAMES, SPARKS
OR WHEN SMOKING! WORK AREA MUST BE WELL VENTILATED. OPEN
DOORS AND WINDOWS WHEN USING SPRAY ADHESIVE.

Tools Needed:

! Hammer (Claw Type)

! Putty Knife

! 3/8" Open End Wrench

! Needle Nose Pliers

! Tape Measure

! Hammer (Small Ball Peen Type)

! 7/16" Open End Wrench

! Sanding Block

! Carpenter's level or 36'' Straight Edge

! Standard Screwdriver

! Awl or 8d Nail

! ½" Open End Wrench

! Phillips Screwdriver

! Scissors or Sharp Knife

! Hairdryer

! Power Screwdriver (optional but very helpful)

! In addition to the assembly tools listed above, it would be useful to

have a rachet with 3/8, 7/16 and ½ socket.

NOTE: Rails are made with cushion rubber at a height that requires standard 2 ¼" diameter balls. Your dealer has

a complete line of Billiard Accessories.

NOTE: This table adds weight to any floor. Be sure floor can withstand this kind of weight. If floor sags, table will

be impossible to level.