Equator mj9200d 用户手册
Page 2
Installing/Removing
Getting things ready to install
your appliance
your appliance
Unpacking, Inspecting, Electricity, Closets/Alcoves,
Plumbing, Venting
Plumbing, Venting
Unpacking
•
Check the packing box for external damage. It is your responsibility to
register any damage with the freight company delivering the product.
•
Remove the strapping, then slide the cardboard surround off the
machine. Re≠move the foam protecting material and the plastic bag.
•
Write down the serial number from the box or the back of the machine.
•
Destroy the carton, plastic bags and foam parts after appliance has
been unpacked.
•
Children should never be left alone or unattended in the area where
appliances being unpacked.
•
If you have any doubts, do not use the appliance and call on a qualified
tech- nician.
OWNER RESPONSIBLE
FOR DAMAGE RESULTING
FROM TIPPING MACHINE
AFTER REMOVING
SHIPPING BOLTS. AVOID
TIPPING MACHINE
FORWARD AFTER
SHIPPING BOLTS ARE
REMOVED
FOR DAMAGE RESULTING
FROM TIPPING MACHINE
AFTER REMOVING
SHIPPING BOLTS. AVOID
TIPPING MACHINE
FORWARD AFTER
SHIPPING BOLTS ARE
REMOVED
Inspecting
WHEN TO REMOVE SHIPPING BOLTS!
WARNING!!! TIPPING THE MACHINE TO POSITION IT FOR USE
MUST BE DONE WITH THE SHIPPING BOLTS STILL IN THE
MACHINE!
TIPPING THE MACHINE WITHOUT SHIPPING BOLTS, CAN
CAUSE THE INNER DRUM TO IMPACT OTHER INTERNAL PARTS,
THUS DAMAGING THEM. POSITION THE MACHINE AS CLOSE
AS POSSIBLE TO IT’S FINAL POSITION AND THEN REMOVE
SHIPPING BOLTS.
MUST BE DONE WITH THE SHIPPING BOLTS STILL IN THE
MACHINE!
TIPPING THE MACHINE WITHOUT SHIPPING BOLTS, CAN
CAUSE THE INNER DRUM TO IMPACT OTHER INTERNAL PARTS,
THUS DAMAGING THEM. POSITION THE MACHINE AS CLOSE
AS POSSIBLE TO IT’S FINAL POSITION AND THEN REMOVE
SHIPPING BOLTS.
√
INSPECT CONTENTS
[ ] Owners Manual
[ ]
[ ]
(Must be installed on hot and
[ ] Warranty Registration Card
[ ] Majestic Literature
[ ] Majestic Literature
SHIPPING
BOLT
BOLT