Sharp PG-LX3500 用户手册
15
Easy Start
1
After the projector turns on, the Setup Guide appears.
(When “Setup Guide” is set to “On”. See page
.)
2
Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size.
3
After adjusting the focus, height (angle) and picture size, press
ENTER to finish the
Setup Guide.
4. Adjust the projected image with the Setup Guide
_P. 26
Correcting trapezoidal distortion using Keystone Correction.
On the remote control
Shrinks
upper side.
Shrinks
lower side.
5. Correct trapezoidal distortion
_P. 28
Press
INPUT P/R to display the INPUT list. Use INPUT P/R to select the Input mode,
and use < / > to select the audio input terminal.
INPUT list
1 COMPUTER1
INPUT
Audio
2 MONITOR OUT
HDMI
H
On the
projector
On the remote
control
On the
projector
On the remote
control
6. Select the Input mode
_P. 29
7. Turn the computer on
Press
STANDBY/ON on the projector or STANDBY on the remote control, and then press
the button again while the confirmation message is displayed to put the projector into
Standby mode.
Onscreen display
On the
projector
On the remote
control
8. Turn the power off
_P.