Sansui SLEDVD329 用户手册

13 EN

Approximately 15 feet

1

Open the battery compartment 

cover in the direction of the arrow.

2

Install two “AA” batteries 

(supplied), paying attention 

to the polarity diagram in the 

battery compartment.

3

Replace the compartment cover.

Aim the remote control at the remote sensor and press control 

buttons to operate.

Operate the remote control within a 30° angle on either side of 

the remote sensor, up to a distance of approximately 15 feet.

•

•

Do not leave the remote control unit exposed to direct sunlight or in hot or humid places.

The remote control unit uses infrared beams to transmit signals, so sunlight or fluorescent light on the remote 

sensor may shorten operating distance.

Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries 

properly.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or rechargeable, (ni-cad, ni-mh, etc) batteries.

Remove batteries if the remote control will not be operated for an extended period of time.

•

•

•

•

•

•

TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz 

polarized AC outlet.

Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). 

Use the attached power cord only.

If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade. 

It is the user’s responsibility to have an electrician replace the obsolete outlet.

If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from 

the AC outlet and plug it back in. The unit should return to normal operation.

•

•

•

Wider Hole and Blade

Polarized AC Cord Plug

(One blade is wider than the other.)

AC Outlet

J59C0321A_EN.indd   13

J59C0321A_EN.indd   13

11/27/12   5:22:18 PM

11/27/12   5:22:18 PM