Troy-Bilt 682 用户手册

Move the Wheels/Tines/PTO Drive Lever to NEUTRAL 

position.
While kneeling on the right side of the tiller, create slack in 

the belt by reaching over to the left side of the pulleys and 

pushing in on the center of the belt with your finger.
Use your right hand to move the belt down and away from 

the lower pulley, in the direction of the engine. See Fig. 7-1.

Push the belt upward to create slack in the belt. See Fig. 

7-2.

1.

2.

3.

4.

Lift the top half of the belt up and over the upper pulley 

and the rubber reverse disc, moving it in front of the 

reverse disc. See Fig. 7-3.

Push the Wheels/Tines/PTO Drive Lever down into the 

FORWARD position. This increases the distance between 

the upper and lower pulleys. Next, lift and pull the entire 

belt out from between the pulleys. See Fig. 7-4.

Place the Wheels/Tines/PTO Drive Lever in FORWARD 

position.
Squeeze the belt in the middle and insert one end in 

between the pulleys. See Fig. 7-4.

5.

6.

7.

8.