Auto Page rs-60 用户手册

Sept/2009 

RS60 Op ODG 

3

 

 

 

Stop remote start operation 

 

Push Twice to stop engine 

 
**  The first push of the 

  button will send an unlock signal to the doors 

and the second push will stop the engine.   
 
XT-11 Operations: 

1)  To remote start the vehicle using the XT-11 press the 

  button 

twice. 

2)  To unlock the vehicle on approach, Press the 

  button once to 

unlock the doors.  If the button is pressed again within 3 seconds, 
the remote starter will shut down.   

REMOTE START OPERATION:   

As with any product that performs automatic functions, there are certain 
safety precautions that you must practice and be aware of. 
1. Keep the transmitter out of children’s reach. 
2. Do not leave anyone in the vehicle while running on remote control. 
3. Alert servicing personnel that the vehicle can be started automatically. 
4. Do not start the vehicle by remote while it’s in an enclosed area or   
  garage. 
5. Always apply the parking brake and lock the vehicle as you exit the 

vehicle. 

6. Should the unit malfunction, disconnect the fuse until the problem is 

corrected. 

7. The use and operations of this system is the sole responsibility of the 

operator. 

8. Some areas may have local ordinances that prohibit leaving a vehicle 
   running on public streets. 
 
A. TO REMOTE START THE VEHICLE: 
When you want to start your vehicle,   
1.  Press 

  button TWICE on either remote transmitter. 

2.  The parking lights will flash to indicate the remote start received the 

signal. 

3.  The engine will start in approximately 5 seconds. 
4.  Once the engine is running, after a couple of seconds the parking light 

will turn on again and climate controls will activate and adjust the 
vehicles interior temperature to your preset setting. 

5.  The vehicle will run for 5 to 30 minute cycle and automatically shut 

down.  The duration of the starting mode is programmable.