Technicolor - Thomson 8900NET 用户手册

Is the correct IP Address/URL being used to address the frame?

If a Domain Name is being used to address the frame, try to connect 
using the frame IP Address instead. 

The Domain Name may not be properly assigned in the local Domain 
Name Server or in the workstation’s host file.

The Domain Name Server may not be available to the workstation. 
Check that the 8900NET module has been properly configured.

Is the correct IP Address or URL being addressed in the web 
browser? 

Was the 8900NET module configured over the serial connection 
with the 

 command? 

Has the 8900NET module been assigned the correct IP Address in 

 (re-run setup over the serial connection)?

Is the workstation in the same subnet as the frame?  If not:

Has the 8900NET module been assigned the correct Default 
Routing Address?

Has the 8900NET module been assigned the correct Subnet Mask?

Has the 8900NET module been rebooted since new IP Address, 
Default Routing, or Subnet Mask were assigned or changed? 

Check if the frame web pages can be opened from a different 
workstation on the network.

Is the subject workstation physically connected to the network?

Check that the workstation and browser have been properly 
configured.

Can the frame be opened from a different workstation?

Has the workstation been assigned a proper IP Address?

Has the workstation been assigned a Gateway Address?

Is the browser configured to connect to the correct port?

Is it attempting to connect through a modem when it should be con-
necting through a network interface module? 

Some laptop have two separate network ports, one for stand-alone 
operation, and the other for operation with a docking station. Is the 
correct port being used?