Epson LT-286e 用户手册

Chapter 1

Setting up your Epson Equity LT-286e portable computer is easy.

Just follow the steps in this chapter. They describe how to

attach the hard disk, connect a printer, and attach the AC

adapter and power cord that come with your Equity LT-286e.

After assembling these parts, you start the computer and run the

system SETUP program.

After you perform these steps, turn to Chapter 2 for information

about using the computer.

The LT-286e has two sets of switches that provide the computer

with information about its configuration each time you turn it

on. The switches are called DIP switches and slide switches.

Both sets of switches are located on the bottom of the

computer.

When the LT-286e is shipped from the factory, these switches

are set for the following type of system:

The internal diskette drive is drive A

The LCD screen is set for EGA mode

The slide switch is set for the LCD screen

The serial port is the primary serial port

The parallel port is the primary parallel port

The CPU clock speed is 12 MHz.

If you plan to use this standard setup, continue with the

instructions in this chapter.

Setting Up Your System

1-1