Epson LT-286e 用户手册

  C h a p t e r   4

You should not encounter any difficulties as you set up and use

your Equity LT-286e. You can correct most problems by

adjusting a cable connection, changing a DIP switch or slide

switch setting, repeating a software procedure, or resetting the

computer. If anything out of the ordinary happens, turn to this

chapter for a solution.

If the suggestions in this chapter do not solve the problem,

contact your Epson dealer. Your dealer may be able to solve the

problem; if not, he or she can refer you to an authorized Epson

Customer Care Center. If necessary, call the Epson Consumer

Information number (1-800-922-891 1) for the location of your

nearest authorized Epson Customer Care Center.

When you contact your dealer or Epson Customer Care Center,

be ready to provide the serial number of your computer (located

on the bottom of the computer), its configuration (including

the type of disk drives and options), and the names and version

numbers of any software programs you are using.

If your computer does not start up when you turn on the power

switch, follow the steps below. (Also see the section on hard

disk problems later in this chapter.)

1. Check that the status indicator bar above the keyboard is

on. If not, remove any diskettes from the diskette drives and

turn off the power. Wait five seconds, then turn the power

back on.

Troubleshooting 4-1