Epson stylus c42 用户手册

Maintaining Your Printer

5. Insert the new cartridge and press 

down firmly on the clamp. Make sure 
the clamp is closed completely.

6. Press the 

 

(

 maintenance button.

If the other cartridge needs to be 
replaced, the print head moves into 
loading postion. Repeat steps 4 
through 6. 

7. Wait until ink charging is finished. (The green 

 

P

 

 power light stops flashing and 

the red 

 

(

 error light goes out.) Ink charging takes about 30 seconds.

Now you’re ready to print again. 

If the red 

 

(

 error light remains on and the printer continues to make noise for more 

than five minutes, open the printer cover and press the 

 

P

 

 power button to turn the 

printer off. Then make sure that the ink cartridge clamps are completely closed. Close 
the printer cover and press the 

 

(

 maintenance button to finish ink charging. If that 

doesn’t work, contact EPSON as described on 

.

Maintenance 
button

Don’t move the print head 
by hand; you could damage 
the printer. Always use the 

(

 maintenance button.