Epson LT-286e 用户手册

下载
页码 60
Executing Diagnostics Tests in Batch Mode
To execute the selected group of diagnostics tests in batch
mode, simply press F6.
DIAG highlights each test name as it runs the test.
If you selected Passbound testing, DIAG displays the pass
number on the right side of the screen above the Run Time
Parameters window. For example:
Pass :
00001
When DIAG is executing a group of tests, you can stop the
testing and return to the System Board submenu of tests by
pressing 
Ctrl Break. 
DIAG completes the current test before it
stops.
If you specified Wait 
on error 
in the Run Time
Parameters, DIAG pauses each time an error occurs. When you
press 
Enter, 
DIAG continues the diagnostics testing.
Running the Tests
When DIAG completes a test, you see this prompt:
Press <ENTER> to return to MAIN MENU.
Press 
Enter 
to return to the main menu.
If an error occurs during a test, note the error message and
contact your Epson dealer. Your dealer may be able to solve the
problem; if not, he or she can refer you to an authorized Epson
Customer Care Center. If necessary, call the Epson Consumer
Information number (1-800-922-891 1) for the location of your
nearest authorized Epson Customer Care Center.
12 
System Diagnostics