Eureka 2270 用户手册
Motor will not start.
Electric Plug
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Try another outlet.
Check circuit breaker.
Motor suddenly stops.
Thermal Cut Off
Refer to page 7.
Does not clean the carpet or
Disposable Dust Bag
Change the bag. Hint: If picking up fine dust, the bag
floor.
and Filter(s)
may not look full, but a fine substance tends to reduce
suction when it blocks the airflow through the paper bag
and filter(s). Make sure the dust bag is installed properly.
Make sure bag cover is installed properly.
suction when it blocks the airflow through the paper bag
and filter(s). Make sure the dust bag is installed properly.
Make sure bag cover is installed properly.
Belt
Replace a cut, loose or out of shape belt.
Brush Roll
Clean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn.
Replace brush roll if bristles are worn.
Hose
Remove any clogs from the hose that restrict the airflow.
No suction at the end of the
Disposable Dust Bag
Change the bag. Hint: If picking up fine dust, the bag
hose.
may not look full, but a fine substance tends to reduce
suction when it blocks the airflow through the paper bag.
suction when it blocks the airflow through the paper bag.
Hose
Remove any clogs from the hose that restrict the airflow.
Check both ends of the hose. (See pages 12-13)
Check both ends of the hose. (See pages 12-13)
Noise from the brush roll area.
Brush Roll
Remove hood and clean debris from the brush roll area.
Belt
Replace a cut, loose or out of shape belt.
Cleaner is hard to push.
Cleaner Height Setting
Turn adjustment knob to a higher position. Hint: Put
handle in operating position. Tilt the cleaner back to
raise the front wheels off floor. Then turn the knob.
handle in operating position. Tilt the cleaner back to
raise the front wheels off floor. Then turn the knob.
Belt
Replace a cut, loose and out of shape belt.
Brush roll will not turn.
Belt
Replace cut, loose or out of shape belt.
Burning smell.
Belt
Replace cut, loose or out of shape belt.
Cleaning height knob will not
Cleaner Height Setting
Hint: Put handle in operating position. Tilt the cleaner
slide.
back to raise the front wheels off floor. Then slide the
knob.
knob.
Missing parts.
Call 1-800-438-7352 between 8:00 a.m. and 4:45 p.m.,
central standard time, Monday through Friday. Know the
model and serial numbers when you call.
central standard time, Monday through Friday. Know the
model and serial numbers when you call.
Questions?
Call 1-800-282-2886, 8 a.m. to 7:30 p.m., (CST), Monday
- Friday. 10:00 a.m. to 6:30 p.m. (CST) Saturday. Know
the model and serial numbers when you call.
- Friday. 10:00 a.m. to 6:30 p.m. (CST) Saturday. Know
the model and serial numbers when you call.
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
CAUSE
SOLUTION
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
16
✓