Eureka 4500 用户手册
16
Motor will not start.
Electric Plug
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Try another outlet.
Check circuit breaker.
Motor suddenly stops.
Thermal Cut Off
Refer to page 7.
Does not clean the carpet
Filters
Clean or replace the filter(s). Hint: If picking up fine
or floor.
dust, the cyclonic cassette may not look full but a fine
substance tends to reduce suction when it blocks the
airflow through the filter(s).
substance tends to reduce suction when it blocks the
airflow through the filter(s).
Cyclonic Cassette
Be sure hose adapter inserts into cyclonic cassette.
Be sure the cyclonic cassette is properly seated into
the cassette body. See page 6.
Empty cyclonic cassette. Note: There are two
chambers in the cyclonic cassette. The chamber with
the screen will fill much faster than the chamber with
the cone. This is normal. When the chamber with the
screen is full, empty cyclonic cassette. Do not wait till
the chamber with the cone is full. See page 9.
Be sure the cyclonic cassette is properly seated into
the cassette body. See page 6.
Empty cyclonic cassette. Note: There are two
chambers in the cyclonic cassette. The chamber with
the screen will fill much faster than the chamber with
the cone. This is normal. When the chamber with the
screen is full, empty cyclonic cassette. Do not wait till
the chamber with the cone is full. See page 9.
Belt
Replace a cut, loose or out of shape belt.
Belt Cover
Snap the belt cover inside the hood if it comes loose.
Brush Roll
Clean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn.
Replace brush roll if bristles are worn.
Hose
Remove any clogs from the hose that restrict the
airflow. Check short hose in the base and long hose.
Refer to page 12 & 13.
airflow. Check short hose in the base and long hose.
Refer to page 12 & 13.
No suction at the end of
Hose Adapter
Hose adapter has to seat inside the cyclonic cassette.
the hose.
Filter(s)
Clean or replace the filter(s). Hint: If picking up fine
dust, the cyclonic cassette may not look full, but a fine
substance tends to reduce suction when it blocks the
airflow through the cyclonic cassette and filter(s).
dust, the cyclonic cassette may not look full, but a fine
substance tends to reduce suction when it blocks the
airflow through the cyclonic cassette and filter(s).
Hose
Remove any clogs from the hose that restrict the
airflow. Check short hose in the base and long hose.
Refer to page 12 & 13.
airflow. Check short hose in the base and long hose.
Refer to page 12 & 13.
Headlight not working.
Light Bulb
Replace light bulb. Refer to page 15.
Noise from the brush roll
Brush Roll
Remove hood and clean debris or items from the
area.
brush roll area.
Belt
Replace a cut, loose or out of shape belt.
Cleaner is hard to push.
Cleaner Height
Put handle in operating position. Tilt the cleaner back
Setting
to raise the front wheels off floor. Then turn the knob
to a higher setting.
to a higher setting.
Belt
Replace a cut, loose or out of shape belt.
Cleaner height knob will
Cleaner Height
Hint: Put handle in operating position. Tilt the
not turn.
Setting
cleaner back to raise the front wheels off floor.
Then turn the knob.
Then turn the knob.
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
CAUSE
SOLUTION
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3