Adam Equipment cbda 用户手册

5.2 UNIT WEIGHT WINDOW

• This display will show the unit weight of a sample. This value is

either entered by the user manually or computed by the scale.
The unit of measure is either gram on all scales with kilogram
selected as weighing unit or in pounds.

• When the scale has determined that there is insufficient number

of samples to accurately determine the count, an arrow will be
shown above "Smpl".

• When the unit weight is not large enough to determine an

accurate count, the arrow will show at "U.Wt".

• When a value has been entered into the memory, the arrow

above "M+" will be on.

• In both the cases the scale continues to operate and the

indicators are to alert the user of a potential problem.

5.3 COUNT

WINDOW

• This display will show the number of items on the scale or the

value of the accumulated count. See the OPERATION section.

• An arrow above the symbols will indicate the following:

Checkweighing is active during counting, "Ck Pcs"

Checkweighing is active during weighing, “Ck Wt”

Checkweighing is active, result is above the High Limit, “High”

Checkweighing is active, result is between the Low and High
Limit, “OK”

Checkweighing is active, result is below the High Limit, “Low”

• Just under the “Count” display is an LED to indicate the status

of the battery charging. When the scale is plugged into the
main power the internal battery will be charged. If the LED is
green, the battery has a full charge. If it is red, the battery
requires further charging and yellow indicates the battery is
being charged.