Eureka 400 用户手册

下载
页码 8
HOW TO ASSEMBLE
Attach Handle
1.  Locate the handle and body.
2.  Line the handle up with the hole in the 
top of the body. Flat side of handle and 
loop forward. 
3.  Push  handle  down  into  body  while 
pressing  button  on  back  of  the  body. 
Handle will click into place.
4.  There are two handle positions available. 
Handle all the way up and handle all the 
way down.
5.  Button needs to be depressed to raise 
and lower the handle.
Button
55
Loop
Handle
Body
HOW TO USE
Power Switch
The power switch has three positions. Off, Floor (hard surface cleaning) and Carpet.
Nozzle with Edge Kleener
®
Airfl ow under the nozzle automatically directs 
suction to the edges and corners for maximum 
full width cleaning.
Experiment with your hard fl oor surfaces, 
sometimes  it  is  best  to  have  brush  roll 
turning. (Switch in the carpet position).
Dual Uses
Push  the  handle  button  to  release 
lock. The handle will slide freely until 
it fi nds one of the two available handle 
positions. It automatically locks in either 
of these two positions.
With the handle collapsed, the unit is 
great for stairs and compact storage. 
With the handle extended, the unit is 
great for fl oor cleaning.
Power 
Switch
Stair 
Stair 
Cleaning 
Cleaning 
Handle
Handle