Sharp AR-5316 用户手册
37
USER SETTINGS
4
SELECTING AUDITING MODE SETTINGS
1
Hold down the [Light] key (
) until
the alarm indicators ( ,
,
,
,
)
blink.
The display shows "- -"
with the left hyphen
blinking.
with the left hyphen
blinking.
2
Enter the program number with the
numeric keys.
numeric keys.
• See "AUDITING MODE
SETTINGS" (p.36) for
the program numbers.
the program numbers.
• The selected program
number blinks.
• For example, to select
"Auditing mode", enter
"10".
"10".
3
Press the [START] key (
).
• The selected program
number stops blinking
and lights steadily.
and lights steadily.
• The currently selected
setting code blinks in
the 1st digit of the
display.
the 1st digit of the
display.
4
Enter the desired setting code for the
program as explained in the detailed
procedures on the following pages.
program as explained in the detailed
procedures on the following pages.
For the setting codes, see "AUDITING MODE
SETTINGS". (p.36)
SETTINGS". (p.36)
5
Press the [Light] key (
) to complete
the settings.
The alarm indicators
( ,
,
,
,
)
go
off and the display returns to the number of
copies display.
copies display.
If you enter the wrong number, press the
[CLEAR] key (
[CLEAR] key (
) and then enter the correct
number.
• If you enter the wrong number, press the
[CLEAR] key (
) and return to step 2.
• If "E" (error code) blinks in the first digit of
the display, press the [CLEAR] key (
)
and return to step 2.
1 3 5
RE D END
Note
START
Note
AR-5316-5320-EX.book 37 ページ 2005年4月8日 金曜日 午前9時35分