Trimble Outdoors aggps 332 用户手册
5 Configuring the Receiver
5 2 AgGPS 332 GPS Receiver User Guide
The default port settings are:
Note –
If the receiver is to work with an Autopilot system, ensure that the
receiver port communication settings are 8-N-1 TSIP 38.4 K. To work with
some other devices and software programs, the receiver port
communication settings must be 8-N-1 NMEA 4800.
some other devices and software programs, the receiver port
communication settings must be 8-N-1 NMEA 4800.
When using a Trimble SiteNet 900 radio, make sure that the
communication settings are correct in the receiver. The default settings
to use with the SiteNet radio are:
communication settings are correct in the receiver. The default settings
to use with the SiteNet radio are:
RTCM
The receiver can accept RTCM data from an external DGPS device,
such as an external radio.
such as an external radio.
TSIP
The receiver can accept or output TSIP data packets from the port
when using the AgGPS 170 Field Computer.
when using the AgGPS 170 Field Computer.
RtkLnk
The receiver can accept real-time corrections (CMR data) from an
external device such as a Trimble radio.
external device such as a Trimble radio.
Port A
Port B
Baud rate
In
TSIP 38,400
TSIP 38,400
Out
TSIP 38,400
TSIP 38,400
Data bits
8
8
Parity
None
None
Stop bits
1
1
Setting
Description
Baud rate
38,400
Data bits
8
Parity
None
Stop bits
1
Table 5.1
Port input settings (continued)
Setting
Description