HP Compaq KB-9965 311059-061 用户手册

To remove the rack bezel: 

1.  Remove the four Torx T-15 screws (two per side) securing the rack bezel to the 

chassis (1). 

2.  Pull the rack bezel away from the chassis (2). 

 

Reverse steps 1 and 2 to replace the rack bezel. 

To remove the access panel: 

1.  Open the front bezel door (tower model only) and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

2.  Extend the server from the rack (rack model only). Refer to “Extending the Server from 

the Rack” in this chapter.