Epson EPL-N4000 用户手册
4-16
SelecType
Flamingo
Rev. C
Rev. C
A5 size
SELEC.FM
11/5/98
Pass 0
L
Proof Sign-off:
M.Takata
M.Takata
_______
K.Nishi
_______
K.Pipa
_______
Setup Menu
* These appear only when the corresponding option is installed.
Interface
Specifies whether the printer can receive data through all the
interfaces available or only through the one selected.
interfaces available or only through the one selected.
Time Out
Sets the length of time the printer waits when it is on line and no
new data is received. When this time is up, the printer searches
for new print data on other channels.
new data is received. When this time is up, the printer searches
for new print data on other channels.
Standby
Saves power by reducing the power to the fixing heater if the
printer receives no data for 60 minutes. In this mode, the printer
begins warming up as soon as you send a print job; it then warms
up and is ready to print in about 60 seconds at rated voltage.
printer receives no data for 60 minutes. In this mode, the printer
begins warming up as soon as you send a print job; it then warms
up and is ready to print in about 60 seconds at rated voltage.
Item
Values
Interface
Auto, Parallel, Network, AUX*
Time Out
0, 5 ... 60 ... 300 seconds in 1 increments
Standby
Enable, Disable
Lang
English, Français, Deutsch, ITALIANO,
ESPAÑOL, SVENSKA, Dansk, Nederl., SUOMI,
Português
ESPAÑOL, SVENSKA, Dansk, Nederl., SUOMI,
Português
Toner
E****F
Face-up Enable
Off, On
Multibin*
Mailbox, Stacker, Sorter, MultiSort
Page Count
0 to 99999999
SelecType Init
-