Abocom IFM560 用户手册
- 1 -
HARDWARE INSTALLATION
Precautions:
Please be sure you take adequate anti-static
precautions when handling this product. The
simplest way to achieve this is; before you begin
and every minute or so during the hardware
installation touch a non-painted surface of the
computer’s chassis.
1. Before installing the device, make sure the
Please be sure you take adequate anti-static
precautions when handling this product. The
simplest way to achieve this is; before you begin
and every minute or so during the hardware
installation touch a non-painted surface of the
computer’s chassis.
1. Before installing the device, make sure the
computer is turned off.
2. Remove the expansion slot cover from the
computer.
3. Carefully slide the PCI modem card into an
available PCI slot, push it evenly and firmly
home and ensure it is screwed securely in
place using the mounting screw (PCI slots
are 85mm long and positioned 40mm from
the PC’s rear panel. Generally there are
several PCI slots side by side).
home and ensure it is screwed securely in
place using the mounting screw (PCI slots
are 85mm long and positioned 40mm from
the PC’s rear panel. Generally there are
several PCI slots side by side).
4. Plug one end of the telephone cable into the
Modem line jack and the other end to the
telephone jack in the wall.
telephone jack in the wall.
5. Replace the cover.
6. After hardware installation is done, move on
6. After hardware installation is done, move on
to the software installation.